Since 1985

 

Our product guide is listed to better help you plan your job. Clapper’s will strive to make any of your custom request fit our production.

A 1% discount will be allowed if invoice is paid 10 days after date of invoice. No discount allowed on prepaid freight. The net invoice is due no later than 30 days after date of invoice. Invoices that remain unpaid after 30 days from date of invoice will be charged a 1-1/2% monthly (18% per annum) service charge.

Past due accounts require a 50% deposit with subsequent order and balance due upon completion of order and before shipment. All orders are subject to credit approval.

Terms

All prices are F.O.B. Meyersdale, PA. Discounted freight rates have been established with numerous carriers and will be passed on to the customer. Applicable state taxes are the responsibility of the customer. Prices are subject to change with a 30-day notice  to the customer. Price protection on special quotations is so noted on our quotation forms.

Prices

Orders will be acknowledged upon receipt of signed, written purchase order. Orders will be processed exactly as acknowledged. Cancellations or adjustments to order will not be made after the order is acknowledged without approval. All cancellations or adjustments are subject to charges due to material and labor in process.

Purchase Orders and Acknowledgements

All products are guaranteed against workmanship defects for one year from date of invoice. Neglect, misuse, unacceptable storage, improper installation, unauthorized repair, and improper maintenance are not covered by our warranty. Liability shall not exceed original purchase price of the defective product.

Our warranty covers cost of our product only and freight to job site. Unloading, storage, and re-installation are not covered by our warranty. Liability shall not exceed original purchase price of the defective product.

Warranty

All products are shipped F.O.B. Meyersdale, PA. All products are packaged and skidded at no charge to assure arrival in good condition under normal freight conditions. Claims for freight damage are the responsibility of the customer. Individual cartons and additional packaging other than our standard will be quoted, if required.

Freight Damage

No product shall be returned to the factory without authorization from the factory. Products shipped to factory without
authorization will be refused.

Returns

Table top sizes are nominal sizes. Tops are manufactured with + or - 3/8" tolerances. If tolerances are critical to job application, customer's purchase order must be noted with acceptable tolerances. Wood products are subject to environmental changes and must be cared for appropriately.

Tolerances

We will make every reasonable effort to make shipment by acknowledged ship date. Occasionally, events beyond our control may make adhering to shipping schedule quite impossible. Customer will be notified before expected ship date if such an occasion arises.

We reserve the right to invoice an order that is ready for shipment but is delayed through no fault of our own.

Ship Dates

We will make every effort to match any special finish. However, wood grains will vary in color and porosity, thereby affecting finishes differently. We believe this enhances the inherent beauty of wood.

Wood and wood products must be handled, stored, and maintained in a manner high quality wood furniture would be handled, stored, and maintained. High or low humidity in storage areas or even in areas of use will adversely affect our wood products.

Wood Products

Proper care and maintenance of our table tops will ensure years of satisfactory use. Only the finest materials available have been used in construction of this top. As with any fine wood furniture, reasonable care must be exercised in daily cleaning. Please use only a slightly water-dampened soft cloth with a mild non-abrasive detergent.

DO NOT USE AMMONIA, DEGREASER, SILICONE, BLEACH OR ABRASIVE CLEANERS

Spills of ANY liquid must be wiped dry immediately. A non-wax build-up polish may be used for added protection. Scratches may be repaired by using a colored wax repair stick. Care for this product as you would care for your fine household furniture. Improper care will void the manufacturers' warranty on this product!

Maintenance

H.P. Laminate Tops - 3 tops or less ADD $30.00 to order unless entire order equals $150.00

Hardwood Veneer Tops - 4 tops or less ADD $50.00 to order unless entire order equals $250.00

Minimum Orders

Corner samples of our standard line of tops will be provided at no charge (limit of 4 sets). Corner samples will be shipped "Freight Prepaid". Full size samples will be invoiced at time of shipment, F.O.B. Meyersdale, PA. If the full size sample results in an order for Clapper's Industries, the full price of the sample except for freight will be credited to the customer's account.

Samples

Formica, Wilsonart, Nevamar, Pionite and Micarta standard patterns available at regular prices. Gloss finishes, Laminart, Oberflex, and other specialty laminates are also available at factory-quoted prices. All tops more than 60" wide will have a splice in the laminate face.

Laminate

45 lb. particleboard with .020 balancing backsheet on all tops. Tops longer than 60 inches may require angle irons to prevent bowing of tops. This would be dependent on the type of base used. Please call for quote.

Substrate and Backing

Always welcomed - consult factory for quote

Special Sizes and Shapes

Prices include red oak, ash, or maple. Consult with factory for other wood species. Standard edge profiles are detailed in our Product Guide. Special edge profiles available at quoted prices.

Wood Edge Bands

Tops may be pre-drilled for any customer-supplied template. To pre-drill and supply up to eight (8) #14 x 1" screws - Add $1.30 (net) per spider.

Pre-Drilling

Prices include post-catalyzed varnish finish on all wood edge tops. Our standard top finish is 60 Sheen. 90 Sheen (high gloss) and 25 Sheen (matte finish) are available at no charge but should be specified with order. Polyurethane or other finishes available at quoted prices.

Finishes

Natural finish is standard. Other edge stains are available as follows:

    • Golden Oak No Charge

    • English Oak No Charge

    • Regency Walnut No Charge

    • Laminate Match or Custom Color * ADD $3 (net) per top

    • Customer-provided Stains No Charge

    • Aniline Dye ADD $5 (net) per top

    • Black Lacquer ADD $3 (net) per top

    • Whitewash ADD $3 (net) per top

Minimum Order = 10 tops or $30 upcharge for custom match stains

Stains

Series 7,000 VBN includes the following T-Mold at regular price: Black, Brown, Frosty White, Dove Gray, New Almond, Red, Blue, Green, Wine, Teal, Old Almond.

Series 15,000 SG includes 3/8" metallic brass T-Mold at regular price. Other metallic colors available at quoted prices.

3" radius corners are standard on all T-Mold tops unless otherwise noted on customer's purchase order.

T-Mould Tops

Quoted per job specifications:

    • Dupont Corian and other solid surface materials

    • Different laminate color on edge than on top - Minimum Order - 10 tops or ADD $30 (net) to order

    • Conference Table Top

    • One-Of-A-Kind Top

    • Ovals

    • Octagon, Pentagon, etc...

    • Formica Color Core

    • Two, Three, Four, etc.. Different Laminate Color Inlay

    • Etc...

Please call with ANY table top request. We welcome your custom work.....

Custom Work

Craftwood Laminate Veneer - a paper-backed wood veneer bonded to a high pressure laminate backer.

Craftwood Laminates consist of stress-relieved,unfinished wood veneers bonded to phenolic backer sheets. The result is a wood surfacing product which is handled and fabricated as easily as postforming grade decorative laminates. Each sheet exhibits individual features and character marks like any other wood veneer product. All sheets are bookmatched, and can be sequence matched from sheet to sheet. Appropriate lead times and pricing apply to sequence matched laminate orders.

Prices include red oak veneer, maple veneer, and ash veneer. Cherry, walnut, Honduras Mahogany, and others are available for additional charge. All tops more than 48" wide will have a splice in the veneer face. Please consult factory for exact pricing....

Lead times are usually one extra week more than normal lead times. Consult the factory.

Hardwood Veneer Tops

  H.P. Laminate Tops

Product Guide

Download our

Table Edge Brochure

which includes our complete line of standard edges, specifications,

and examples.